USER GUIDES

Instructions

Please read the following instructions carefully before setting up the Aurender Music Player.

• Be careful not to drop the device to avoid internal damage.

• Do not disassemble the device.

• Keep magnetic materials away from Aurender to prevent any damage to data.

• Do not expose device to oil, dust, water, high humidity or smoke.

• Keep cooling fins free from obstruction.

• When cleaning, use a soft, dry cloth. If stains remain, lightly dampen the cloth with water and gently wipe the unit with minimal pressure. Ensure any residual moisture is promptly wiped away to prevent water spots.

• All servicing must be performed by a qualified representative or the warranty will be voided.

• Unplug power cord during severe lightning storms or when unused for a long period of time.

• Unplug the device from the outlet only after completely turning off the unit.

• Always turn the power off before connecting or disconnecting any cables.

• Please note that hard drives can fail break down.

It is important to backup your music collection periodically to a separate memory device. In the event of drive failure, Aurender is not responsible for any loss of data. The drive manufacturer will only replace faulty drives under warranty and will not compensate for any loss of data.

Positioning

• Place your device on a flat, horizontal, and stable surface.

• Keep away from heat sources, such as radiators.

• Allow space around the device for ventilation.

• Do not place inside an enclosed cabinet.

Front Panel

1. ON/OFF/Standby

Pressing the illuminated power button will power the unit on and off. To power the A1000 on from standby, press the button once, so the Aurender display shows “Aurender A1000”. If the A1000 is powered on, enter Standby mode by pressing the front panel button once, and the unit will turn off with a display message that says “shutting down, please wait”. If the Aurender is powered on but the screen is off, you will hit the power button one time to wake the screen up and one more time to enter standby mode. *In standby mode, the Aurender is not reachable with the Conductor app. The power LED will flash during boot up and shut down. The flashing will stop when the boot procedure completes.

2. LCD Display

3. Volume Knob

4. Input selection

Press the button to toggle input A1000 – BT – ARC – Coaxial – Optical – USB

5. IR Receive window

6. Output selection

Press the button to toggle output analog – digital

7. Display Menu button

Press to cycle through 3 display options: Song Information, Playlist and Aurender IP. Songs from playlists may be selected using the four buttons on the right side of the front panel display. Use buttons 8 and 10 to scroll between playlists and button 9 to select a playlist. After the playlist is selected, press button 9 again to start playback. Once the playlist is selected, buttons 8 and 10 can be used to select songs within the selected playlist.

8. Play Previous button

Press to skip to the previous track.

9. Play/Pause button

Press to start or stop playback.

10. Play Next button

Press to skip to the next track

Rear Panel

1. BT Antenna

2. HDD or SSD 2.5” Slot

3. Analog Audio Output – RCA Right

4. Analog Audio Output – RCA Left

5. Digital Audio Output – Coaxial SPDIF (RCA)

6. Digital Audio Input – Coaxial SPDIF (RCA)

7. Digital Audio Input – Optical SPDIF

8. TV ARC Audio Input

9. USB Audio Input

10. 1Gbps LAN port

11. 12V Trigger Output

12. USB Audio 2.0 Out

13. USB 3.0 Data Port

14. AC Power Socket

15. AC Power Switch

Connect to a power outlet with AC Power cord.

Remote Control

1. Power ON/OFF

2. MUTE

3. Play Previous

4. Play / Pause

5. Play Next

6. Volume Up

7. Volume Down

8. Display Menu

9. Input — Aurender (SSD/HDD)

10. Output — Analog

11. Output — Digital

12. Input — Google Cast

13. Input — BT

14. Input — USB

15. Input — Optical

16. Input — Coaxial

17. Input — TV ARC

Pairing BLE remote

1. Turn on A1000.

2. Press #4 (Play/ Pause) and #13 (BT) button together for 5 seconds.

3. LED on remote will start blinking in pairing mode.

4. If LED stops blinking, it’s done.

Connection

Connection to amplifier and router

Connect A1000 with your TV using ARC

1. Check that your TV has HDMI ARC (Audio Return Channel) and connect the A1000’s ARC port with this input using HDMI 1.4 or newer cable.
2. Connect main power to your A1000 unit and power it ON.
3. Power ON your TV, enable HDMI/ARC audio input from TV side. Make sure to setup audio output to PCM.
4. A1000 will now be operated from your TV via CEC commands from TV. This will allow you to use you TV-remote to adjust volume of the A1000 and also the A1000 will power ON and OFF together with your TV.
5. A1000 will power on/off with TV only in ARC input mode.

Connect A1000 through BT:

1. Change input to “BT” mode by pressing remote button #13.
2. You can connect A1000 up to two devices thru BT.
3. For initial setting, it should be in pairing mode. Please press the “Menu” (3 lines) button on front panel or remote. The LCD will show “pairing request” message.

4. Please turn on BT on your phone and search for “A1000”, then select it.
5. It will show “connecting” on LCD when trying to connect and show “connected” when done.
6. If two devices are already connected, you need to disconnect or unpair one of them to connect another BT device. Otherwise, the below screen will show up when pressing “Menu” button.

Streaming audio playback